How to clean up diamond plate

Replies to This Discussion

Permalink Reply by Deanna on March 26, 2009 at 11:20pm

Try Never Dull. You'll have to apply by hand and rub the tarnish and rust out, then take an old buffer pad and buff it out till she shines like new.

▶ Reply to This

Permalink Reply by Bobby on March 27, 2009 at 12:46am

Eagle One Wadding Polish

Mothers Aluminum Polish

both works that much better, prepare to eat through towels.

I use both on diamond on units and they both clean it right up. Obviously more fade, gonna be more work

▶ Reply to This

Permalink Reply by Jeff Gaudio on March 27, 2009 at 12:53am

Get aluminum polish, and if possible, an old piece of carpet cut into a small square. That'll allow you to get in between the diamond plate without killing your fingers.

▶ Reply to This

Permalink Reply by Jeremy Bell on March 27, 2009 at 3:14am

yea i agree with bobby i have seen mothers work miracles

▶ Reply to This

Permalink Reply by Fred Cummings, Jr. on October 26, 2009 at 10:25pm

I never gave the carpet thing a thought. GREAT idea, thanks

▶ Reply to This

Permalink Reply by Paul Montpetit on March 27, 2009 at 7:59am

I had some truckers tell me about a Diamond Plate cleaner and polish....The only place they have seen it is at some of the truck stops......Paul

▶ Reply to This

Permalink Reply by BillySFCVFD on March 27, 2009 at 11:24am

A tube of Semi-Chrome with Jeff's carpet piece idea. TCSS

▶ Reply to This

Permalink Reply by Lisa Acton on October 26, 2009 at 9:40pm

The carpet peices work great!!!! I use them all the time. With the mothers polish. Good luck.

▶ Reply to This

Permalink Reply by TJ.JONES on March 27, 2009 at 11:34am

toliet bowl cleaner we used it before and it worked

▶ Reply to This

Permalink Reply by Dave Galka on March 27, 2009 at 12:41pm

Dow tub and ile cleaner the scrubbing bubbles if you want to do it quick, other wise mothers with a lot of elbow grease and towels

▶ Reply to This

Permalink Reply by Jason Koontz on March 28, 2009 at 2:33pm

We've used simple green and a hard bristle brush.

▶ Reply to This

Permalink Reply by Robert C. Baker on March 28, 2009 at 2:50pm

Greetings Brother, try some of that " CHIEF'S DIAMOND PLATE AND CHROME CLEANER" it works great. All the other methods mentioned are tried and true and work exceptionaly well. But I must admit after using chiefs products I have come to depend on it for that parade looking finish.

Good Luck,
BB.

▶ Reply to This

• First
• Previous
• Next
• Last